CO2 Condensing Unit – OCU-CR200VF5 (4kW MT/2kW LT)
Enquire Now
Panasonic’s CR Series of C02 condensing units provide the ideal solution for supermarkets, convenience stores and fuel stations.
Keeping food always fresh at right temperature in showcases or cold rooms is a very critical point and
one of the biggest challenges for those retailers has been the expensive effects of refrigeration
breakdowns which can result in costly product wastage.
Sales information Sales information 2 Service manuals Installation manual IU Dimensions Fault codes
Product video
Please note that this page is specific to model OCU-CR200VF5 only
System Combination
- OCU-CR200VF5 (Standard Model – includes Liquid Line Dryer)
- OCU-CR200VFS5SL (Optional Anti-Corrosion Model – includes Liquid Line Dryer)
- SPK-TU15 Tube Connection Adaptor for Vacuum and Service
- PAW-CO2 Plug and Play Carel Panel (Room and Superheat Control including both Panel and Expansion Valve)
- Note that system can operate with field supplied RMS Panel
PRV
- As standard, the 2HP unit will be supplied (fitted) 120 bar PRV fitted on the pressure vessel
Applications
- Convenience Stores
- Supermarkets
- Funeral Parlours
- Service Stations
Key Features
- Single Phase Model
- Medium Temperature ( -10°C) 8kW
- Low Temperature (-35°C) 4kW
- Medium Temperature 4kW or Low Temperature 2kW from the same model unit
- Optional Anti Corrosion Model
- RDM Compatible
- 5 Year Compressor Warranty
- Full training available
- BMS Ready (Modbus)
- Ready for connection to Carel, Danfoss, Eliwell and RDM operating systems
- Save installation time with Plug and Play Kit
- Up to 25m piping length
- High ESP
- Low noise – ideal for sites close to residential areas
- Simple Design Tool available via Pro Club
Technical Data
| Type (MT: medium temp. LT: low temp.) | MT (4kW) / LT (2kW) | |||||
| Standard model | OCU-CR200VF5 | |||||
| Anti corrosion coating model | OCU-CR200VF5SL | |||||
Power supply | Voltage | V | 220 / 230 / 240 | |||
| Phase | Single Phase | |||||
| Frequency | Hz | 50 | ||||
| Cooling capacity at ET -10°C AT 32°C | kW | 3,70 | ||||
| Cooling capacity at ET -35°C AT 32°C | kW | 1,80 | ||||
| Evaporator connection | Multiple (check with Logicool) | |||||
| Evap Temp | Min-Max | °C | -45 ~ -5 | |||
| Ambient Temp | Min-Max | °C | -15 ~ +43 | |||
| Refrigerant | R744 | |||||
| Design pressure liquid line | Mpa | 12 | ||||
| Design pressure suction line | Mpa | 8 | ||||
| User system external alarm. Digital input. Non-voltage contact | Yes | |||||
| Liquid tube electromagnetic valve | Vac | 220 / 230 / 240 | ||||
| Showcase operation ON/OFF signal. Digital input. Non-voltage contact | Yes | |||||
| Modbus communication line | (RS485) | Ports | 2 | |||
| Compressor type | 2- stage rotary | |||||
| Dimension H x W x D | mm | 930 x 900 x 437 | ||||
| Net weight | Kg | 70 | ||||
Piping connections | Suction pipe | Inch (mm) | 3/8 (9,52) Refrigeration Grade K65 Specification Pipe | |||
| Liquid pipe | Inch (mm) | 1/4 (6,35) Refrigeration Grade K65 Specification Pipe | ||||
| Length of connection piping | m | 25 | ||||
Standard performance | Ambient temperature | °C | 32 | |||
| Evaporating temperature °C | °C | -10 | -35 | -10 | -35 | |
| Cooling capacity | kW | 3,70 | 1,80 | 3,70 | 1,80 | |
| Power consumption | kW | 1,79 | 1,65 | 1,79 | 1,65 | |
| Nominal load ampere | A | 7,94 | 7,26 | 7,94 | 7,26 | |
| Sound pressure level | dB(A) | 35.5 (Evap Temp -10°C,65 S-1, 10m from Product) | ||||
| PED Category | I | |||||
| Air volume | m³/min | 54 | ||||
| External static pressure | Pa | 17 | ||||
| Heat recovery port | — | |||||
| Drier filter liquid line, diameter | (6.35mm) | Included | ||||
| Drier filter liquid line, diameter | (15.88mm) | N/A | ||||
Back to products