CO2 Condensing Unit – OCU-CR1000VF8 (15kW MT)

Enquire Now

Panasonic’s CR Series of C02 condensing units provide the ideal solution for supermarkets, convenience stores and fuel stations.
Keeping food always fresh at right temperature in showcases or cold rooms is a very critical point and
one of the biggest challenges for those retailers has been the expensive effects of refrigeration
breakdowns which can result in costly product wastage.

Please note that this page is specific to model OCU-CR1000VF8 (not VF8A) only

System Combination

  • OCU-CR1000VF8 (Standard Model – includes Liquid Line Dryer and 80 Bar PRV on Accumulator)

  • OCU-CR200VF8SL (Optional Anti-Corrosion Model – includes Liquid Line Dryer and 80 Bar PRV on Accumulator)

  • SPK-TU15 Tube Connection Adaptor for Vacuum and Service

  • PAW-CO2 Plug and Play Carel Panel (Room and Superheat Control including both Panel and Expansion Valve)
    • Note that system can operate with field supplied RMS Panel

   

  • S-008T – Required Suction Filter (must be quoted and ordered)

  • PZ-68S Oil (if pipe run is between 50 and 100m)
  • PRV
    • As standard, the 8HP unit will be supplied (fitted) dual 80 bar PRV on the pressure vessel.

 

Applications

  • Convenience Stores
  • Supermarkets
  • Funeral Parlours
  • Service Stations

Key Features

  • Medium Temperature 14kW
  • Optional Anti Corrosion Model
  • RDM Compatible
  • 5 Year Compressor Warranty
  • Full training available
  • BMS Ready (Modbus)
  • Ready for connection to Carel, Danfoss, Eliwell and RDM operating systems
  • Save installation time with Plug and Play Kit
  • Long piping length
  • High ESP
  • Low noise – ideal for sites close to residential areas
  • Simple Design Tool available via Pro Club

 

 

Technical Data

Type (MT: medium temp. LT: low temp.)MT (7,5kW)MT (16kW) / LT (8.0kW)
Standard modelOCU-CR1000VF8OCU-CR1000VF8A
Anti corrosion coating modelOCU-CR1000VF8SLOCU-CR1000VF8ASL
Power supplyVoltageV380 / 400 / 415
PhaseThree Phase
FrequencyHz50
MT Cooling capacity at ET -10°C AT 32°CkW14.0015.10
LT Cooling capacity at ET -35°C AT 32°CkWN/A (MT Only)8.00
Evaporator connectionMultiple (check with Logicool)-45 ~ -5
Evaporation Min ~ Max temperature°C-20 ~ -5
Ambient Min ~ Max temperature°C-15 ~ +43
RefrigerantR744
Design pressure liquid lineMpa8
Design pressure suction lineMpa8
User system external alarm. Digital input. Non-voltage contactYes
Liquid tube electromagnetic valveVac220 / 230 / 240
Showcase operation ON/OFF signal. Digital input. Non-voltage contactYes
Modbus communication line (RS485)PortsYes
Compressor type2- stage rotary
Dimension H x W x Dmm1941 x 890 x 890
Net weightKg293320
Piping connectionsSuction pipeInch (mm)3/4 (19,05) Refrigeration Grade K65 Specification Pipe
Liquid pipeInch (mm)5/8 (15,88) Refrigeration Grade K65 Specification Pipe
Length of connection pipingm100 (PZ-68S Refrigeration Oil must be added over 50m)







Standard performance
Ambient temperature°C32
Evaporating Temperature Mid-Temp°C-10-10
Evaporating Temperature Low-Temp°CN/A (MT Only)-35
Cooling Capacity Mid-TempkW14.0015.10
Cooling Capacity Low-TempkWN/A (MT Only)8.00
Power Consumption Mid-TempkW8.208.20
Power Consumption Low-TempkWN/A (MT Only)7.57
Nominal Current Mid-TempA12.6012.60
Nominal Current Low-TempAN/A (MT Only)11.60
Sound Pressure Level Mid-TempdB(A)36.0036.00
Sound Pressure Level Low-TempdB(A)N/A (MT Only)36.00
PEDCategoryII
Air volumem³/min220
External static pressurePa58
Heat recovery portN/AYes
Drier filter liquid line, diameter 6,35mmN/A
Drier filter liquid line, diameter 15,88mmYes (D-155T / FCY-8P)

 

Back to products
Add selected to wishlist